Tanya Nguyen, Staff Writer
NASA's John F. Kennedy Space Center
NASA is teaming up technology developed for the space shuttle and designs used for the Apollo Program to produce elements of the next spacecraft destined to deliver astronauts to the moon.
An early sign of that combination has made its way to NASA's Kennedy Space Center in the form of a prototype heat shield, which is the same size and dimensions of the one planned to protect the Orion spacecraft as it enters Earth's atmosphere on the way back from the International Space Station or the moon.
The arrival of the heat shield stirred up excitement from workers on the Constellation Program as they were able to see for the first time one of the first pieces of Orion's full-scale test hardware.
"When (it) got here at the end of November, it was very exciting because it is the first piece of hardware," said Joy Huff, a NASA shuttle orbiter thermal protection system engineer who is spearheading Kennedy's work on the Orion heat shield. "Not flight hardware, but it is flight-type material. And just to see the full size, it really gives you a scale of the size of it."
At five meters in diameter, the heat shield is the largest one of its kind ever built. The prototype was built largely just to prove it could be done, Huff said.
Also known as a manufacturing demonstration unit, or MDU, the prototype was also created by the need to develop heat shield evaluation, inspection and handling procedures, said Jim Reuther, project manager of the Crew Exploration Vehicle thermal protection system at NASA's Ames Research Center.
Although parts of Orion's thermal protection system, which serves as a barrier against the heat upon re-entry into Earth, will use shuttle tile materials, the base of the heat shield endures the most heat and will burn away or "ablate" as it descends through the atmosphere at more than 25,000 mph.
The use of ablative materials mirrors that of the Apollo Program's approach, in which the entire entry capsule was covered with an ablator, Reuther said. The Orion heat shield also uses techniques perfected for the shuttle's thermal protection system, particularly the bonding method used to attach the segments of ablative material to the base heat shield. But since the area to be protected is much smaller than that of the shuttle, and because the base of Orion's heat shield will not be reused, its design is simpler in respect to the number of parts and reusability.
The prototype heat shield is made of the leading candidate material called PICA, which stands for phenolic impregnated carbon ablator material. The PICA material was previously used for the base heat shield of Stardust, a small robotic spacecraft that successfully completed its mission of obtaining comet samples and returned to Earth in January 2006.
Because Stardust was less than 3 feet in diameter, it was possible to cast its heat shield in a single piece as opposed to the many pieces needed to make Orion's heat shield. At 16.5 feet in diameter, Orion's heat shield will require up to 200 pieces of PICA blocks.
"The actual final number of PICA blocks will be determined by both manufacturing and thermal-mechanical design constraints,"Reuther said. "However, when compared to the roughly 24,000 tiles used on the shuttle, the final number of blocks will be very manageable."
The blocks on the heat shield share the same delicate characteristics as the shuttle's tiles. Designers also plan to include gap fillers between blocks, just as with the shuttle.
NASA chose an ablative heat shield that slowly burns off because it can handle higher temperatures than the shuttle's reusable tiles. A spacecraft returning from a lunar mission is expected to encounter temperatures as high as 5,000 degrees Fahrenheit during re-entry into Earth’s atmosphere, compared to about 2,300 degrees for a space shuttle re-entry.
Because of this, the Orion heat shield can only be used once, Huff said. The prototype heat shield rests in Hangar N at Cape Canaveral Air Force Station where will it undergo several months of nondestructive evaluation testing, or NDE, that mainly includes laser scans and X-rays. The tests will be used to reveal flaws purposely built into the heat shield.
"We want to get it into the X-ray facility to use X-rays to look for these known flaws," Huff said. "That's part of the NDE task to come up with standards, so when you get a flight unit, you know what you're flying."
But before any NDE testing can be performed, the team at Kennedy has to learn the best way to move and handle the heat shield. Because of the size of the prototype, they also will have to test and develop new handling standards that will be applied to the actual flight heat shields.
Backup procedures call for using a crane to handle the prototype, but Huff said she hopes to see an adaptor made that will allow a forklift to be used instead. The forklift would make it easier to handle the prototype inside buildings and as it undergoes testing procedures.
"The materials (for the adaptor) have been ordered, (so we) should be fabricating (it) within the next few weeks, get that built and then we'll put the MDU on the adaptor and start NDE testing," Huff said.
She's looking forward to a special milestone to take place by late summer: turning all handling and NDE testing results over to Lockheed Martin.
And when that happens, the Constellation Program's mission of putting man on the moon and beyond will be one big step closer.
