Showing posts with label Lunar Regolith Simulants. Show all posts
Showing posts with label Lunar Regolith Simulants. Show all posts

Monday, July 5, 2010

DesertRaTS testing Electrodynamic Dust Shield


Figure 1. shows an example of a lunar architecture that is being evaluated at DesertRaTS.

Calle & Immer, et.al.
Electrostatics and Surface Physics Laboratory
ASRC Aerospace
Florida Institute of Technology
Oklahoma Baptist University


NASA is developing a Habitat Demonstration Unit (HDU) to investigate the feasibility of lunar surface technologies and lunar ground operations. The HDU will define and validate lunar scenario architecture through field analog testing. It will contain a four-port vertical habitat module with docking demonstration capabilities. The Electrodynamic Dust Shield (EDS) is being incorporated into the HDU to demonstrate dust removal from a view-port and from a door prior to docking procedures. In this paper, we will describe our efforts to scale up the EDS to protect a viewport 20 cm in diameter. We will also describe the devel-opment of several 20 cm × 25 cm EDS patches to demonstrate dust removal from one of the HDU doors.

NASA has designed and built a Pressurized Excursion Module (PEM) for a Lunar Habi-tat Demonstration Unit (HDU), a full scale lunar habitat prototype, to perform analog testing of the lunar environment in desert locations. The Desert Research and Technolo-gy Study (RaTS), a series of analog tests that NASA has held at several different desert locations for several years, allows the Agency to run through potential “day in the life” scenarios at a lunar outpost with prototype equipment. These analog tests provide engi-neers and scientists with insights into the utilization of the different systems so that the exploration architecture and the operation concepts can be refined. The HDU will be operated during a 14- to 21-day mission at the 2010 DesertRaTS event planned for Black Point Lava Flow in Arizona.

The PEM has four doors with docking demonstration capabilities. Each door contains a 21-cm diameter viewport. During docking activities with the Lunar Electric Rover (LER), which contains a similar door, the two doors open inward. Any dust accumulating on the surface of these doors must be removed prior to docking.

The Electrodynamic Dust Shield (EDS) technology that NASA has been developing as an active dust removal system during the past several years is being used to demonstrate dust removal from the PEM door. A transparent EDS system has also been installed on one of the viewports to maintain it dust-free during the DesertRaTS activities.


Figure 6. Photographs of the 20-cm diameter transparent EDS for the PEM viewport during laboratory tests. JSC-1A stimulant dust was deposited in a relatively uniform fashion, as shown at the top. The photograph below it shows the EDS after activation. Dust has been removed to the region outside the electrode grid. These tests were performed with the EDS sitting horizontally in a glove box.

In this paper, we describe the development of the different EDS systems installed on the PEM and the demonstration tests planned for DesertRaTS. We also describe scale up plans for future HDU demonstrations.

Review the research (PDF), HERE
Proceedings ESA Annual Meeting on Electrostatics 2010

Friday, October 2, 2009

Regolith simulant explored in Montana

USGS project geologist Doug Stoeser looks through a huge pile of waste rock from the Stillwater Mine in Nye Wednesday afternoon. Stoeser is working in conjunction with NASA to find the perfect combination of minerals from mine waste to closely simulate a lunar surface to prepare for future moon explorations.

Clair Johnson
Billings Gazette

"Stephen Wilson, a USGS research chemist from Denver, said the agency knew where to find the material NASA sought. "Oh, go to the Stillwater,'' he said. "The Stillwater is one of the unique places that can do it. What is waste rock for the Stillwater mine is exactly what we want.''

"USGS began collecting the rock samples for testing in 2007 and so far has made five trips to the mine site. Wilson said it took two trips to find an outcrop -"a big block of really great rock''- that appears to have a higher grade of minerals. Another source of the regolith material is in the waste rock dug from the mine to get to the platinum-bearing ore.

"So far, USGS has collected 20 tons of Stillwater rocks and has processed 4 tons into regolith in Denver, Wilson said. The project is in the early phase, during which USGS is sampling and testing the rock for quality and consistency and to learn "what will and what won't work,'' he said.

"While artificial regolith has been made before, the new material is "unprecedented'' in its complexity and similarity to the regolith found at moon's southern pole, USGS said."

Read the feature story HERE.

Monday, September 7, 2009

Synthesis and Stability of Iron Nanoparticles for Lunar Environment Studies

mong the hairiest problems facing the inevitable "extended human activity on the Moon" often discussed and underscored mightily in the Almighty "Scientific Context for the Exploration of the Moon" (NRC, 2007), is lunar dust. The six brief tours of the lunar surface by crews from the United States, forty years ago, definitely proved to be dusty.

However, not in the way some expected.

Neil Armstrong repelled away from the lunar module Eagle very carefully, on the first small step, playing out the slack glancing over both shoulders. It was a great relief to many serious geologists and to Armstrong when he, Aldrin and Eagle didn't suddenly sink into a loose pack of dust, perhaps many meters deep.

Those who believed the Moon's dusty surface was sufficiently packed down by micro-meteorites, etc., and additionally held together by a wide variety of chemical valences and gravity won out., though the same process of "gardening" eventually re-works the outer skin of the Moon every 2 million years, and has is patient.

Shards of rock are clipped off larger microscopic fragments and are so light, they've proven highly susceptible to charging in UV sunlight. In turn, this charge carries with it dust as it is repelled in every direction by the whole Moon's velocity through the interplanetary magnetic field, Earth's magnetic field and crustal magnetic anomalies locally embedded on the Moon with some strong enough to form their own pause in the relentless Solar Wind.

In short, a great volume of lunar dust levitates.

Not one vacuum bottle meant to remain sealed with it's lunar sample intact in a "native" environment managed to make it back to Earth intact, though the jostling of the handling of the samples by human and robotic methods before re-entry, and the forces of re-entry themselves are given most of the blaim, maintaining the integrity of things like flexible seals will prove more than a little important if human are to survive on the Moon or Mars for very long.

Coming up with a simulant has not been easy, and still eludes efforts to manufacture enough to be truly useful. Beyond that have been efforts to add microscopic divots by as would be created by random micro-meteorites and the little scars caused by the plasma flash of atomic nucleon of iron, cosmic rays of elemental metal traveling at or very near the Speed of Light.

The result is the hardest aspect of lunar dust to duplicate, a tattoo of "nanophase iron," the presense of which irritates many scientists (literally) and delights others, who see in it ubiquity on the Moon a resource with a potential not yet dreamed of.

Ching-cheh Hung and Jeremiah McNatt at NASA Glenn Research Center in Cleveland have been studying how to add the distinctive flavor of nanophase iron to lunar dust "simulant," fast enough to be of use.

Simulant of lunar dust is needed when researching the lunar environment. However, unlike the true lunar dust, today’s simulants do not contain nanophase iron. Two different processes have been developed to fabricate nanophase iron to be used as part of the lunar dust simulant:

(1) Sequentially treating a mixture of ferric chloride, fluorinated carbon, and soda lime glass beads at about 300 °C in nitrogen, at room temperature in air, and then at 1050 °C in nitrogen. The product includes glass beads that are grey in color, can be attracted by a magnet, and contain α-iron nanoparticles (which seem to slowly lose their lattice structure in ambient air during a period of 12 months). This product may have some similarity to the lunar glassy regolith that contains FeO.

(2) Heating a mixture of carbon black and a lunar simulant (a mixed metal oxide that includes iron oxide) at 1050 °C in nitrogen. This process simulates lunar dust reaction to the carbon in a micrometeorite at the time of impact. The product contains a chemically modified simulant that can be attracted by a magnet and has a surface layer whose iron concentration increased during the reaction. The iron was found to be α-iron and Fe3O4 nanoparticles, which appear to grow after the fabrication process, but stabilizes after 6 months of ambient air storage.

Introduction: Understanding the physics, chemistry, and toxicity of the lunar dust in the lunar environment is essential for lunar exploration. In order to do research on lunar dust, a few simulants that mimic the lunar dust obtained during the Apollo missions were produced. Although it is noted that the Apollo lunar dust contains chemically reactive iron nanoparticles, none of the current simulants do (Ref. 1). The goal of this research is to produce iron nanoparticles that can be used as a component of lunar dust simulants. Additional efforts were made to investigate the stability of the iron nanoparticles thus produced over a period of several months...

Read the Brief Study HERE.

Monday, August 3, 2009

A Quick Lunar History

Micrometeorite erosion: One of many kinds of space weathering common on the Moon, Apollo 16 sample of lunar breccia steadily "smoothed" by exposure to the conditions in the part of the inner-Solar System occupied by Earth is recorded on the Moon. The immediate surface of the Moon is "gardened," re-worked every two million years (Apollo 16-NASA: Sample A64455).

In preparing for the Lunar Regolith/Simulant Workshop in Huntsville, this past March, Jennifer E. Edmunson of NASA's Marshall Space Flight Center put together a clear, mostly jargon-free "history of the Moon," showing "explanations for the importance of understanding lunar history for engineers and users of lunar simulants. Included are summaries of the initial impact that is currently in favor as explaining the moon's formation, the crust generation, the creation of craters by impactors, the era of the lunar cataclysm, which some believe effected the evolution of life on earth, the nature of lunar impacts, crater morphology, which includes pictures of lunar craters that show the different types of craters, more recent events include effect of micrometeorites, solar wind, radiation and generation of agglutinates. Also included is a glossary of terms.

Download the pdf HERE.

Friday, May 29, 2009

The Search for Lunar Regolith Simulants

CoreCast #97 Marisa Lubeck -- How the U. S. Geological Servey is creating artificial moon regolith, assisting NASA with planning future lunar exploration. (Transcript is also available)

With what is sounding like a real breakthrough in the search for a useful and realistic "simulant" to recreate the dusty lunar surface earlier this week, perhaps it's time to review this nagging problem once again.

The breakthrough

Earlier this year NASA was given its highest mid-term grades in the keeping up with the science preparations ahead of "extended human activity on the Moon, for its effort, but not for its progress in with the sticky problems in the path back to the Moon: lunar dust.

The biggest problem has been developing simulated dust like none found anywhere on Earth, silicate "ground exceedingly fine" by the same processed reworking the outer centemeters of the lunar surface every 10 million years or so. So far, the best available is a good proxy, aside from the slow process needed to come close to fixing nanophase iron, and the electro-static properties than may make lunar dust most of the Moon's atmosphere, levitating micro-fine particles in a wave that may continuous follow the sunset.

Today the U.S Geological Service, released a flash video discussing the situation, and their role, linked above.

You can read about the breakthrough HERE.

Thursday, May 28, 2009

Zybek boasts Regolith simulant at volume

Zybek engineer Michael A. Weinstein uses a welding mask because the plasma process creates extremely high temperatures to melt minerals. (THE DENVER POST | John Prieto)

Plasma process speeds weathering at high volumes needed for badly needed properties, but does it embed nanophase fe?

BOULDER — There isn't a big demand for man-made moon dirt, but there is one customer — the National Aeronautics and Space Administration — and that's enough for Steve Wilson and Mike Weinstein.

NASA plans to construct a lunar base by 2024 and needs to know a lot about moon dirt.

So Wilson, a U.S. Geological Survey scientist, and Weinstein, a principal at Zybek Advanced Products Inc., teamed up to make as much as 100 tons of moon dirt for NASA.

It was just a few minutes after the first moon landing, in 1969, when astronaut Neil Armstrong, trying to plant an American flag, learned that moon dirt wasn't Earth dirt.

The surface looked sandy, but Armstrong struggled to get the pole in.

Moon-dirt particles are "very angular" and compact, making the soil tough to penetrate, Wilson said.

Mineral molecules on Earth, on the other hand, tend to be rounded at the edges because of weathering. And there's not much weather on the moon.

The Apollo astronauts also found that the moon dust got clogged in the joints of their spacesuits and was sharp enough on its edges to tear the fabric.

When NASA decided in 2006 to develop a solar-powered lunar base designed to use the moon's natural resources to supply air and energy, the agency was in the market for moon dirt.

The USGS, which makes "reference" samples of geochemical materials for scientists, was asked to find something akin to moon dirt, or, as geologists call it, "regolith."

"We knew the constituents of regolith from the Apollo samples, so the question was what on Earth came close?" Wilson said.

The answer turned out to be waste rock from Stillwater Mine, near Nye, Mont.

The material — crushed to simulate the angularity of molecules without being ground too much — got close to moon dirt, Wilson said.

But two key ingredients — a high-quality glass and a low-quality glass called aggulinate — were missing.

The two are created by the bombardment of the atmosphere-deficient moon by micrometeorites.

Enter Boulder-based Zybek and its plasma arc smelter.

On Wednesday, a crushed-rock mixture was fed into the belly of the smelter as the heat rose to as high as 40,000 degrees Fahrenheit. Dropping out of a funnel at the bottom of the smelter came a fiery orange stream of glass and aggulinate. The glass and aggulinate, which make up 40 percent to 50 percent of the regolith, will be blended with other ores, Wilson said.

The "lunar simulant" will be used to test breathing filters, systems to protect surfaces, bearings and gears from dust and grit, and the performance of vehicles and hardware, said Carole McLemore, NASA project manager.

"Anything that goes to the moon is going to touch regolith," she said. "So we want to know how it will perform before it gets to the moon."

Monday, February 9, 2009

Some Expected Characteristics of Lunar Dust: A Geological View Applied to Engineering

Hardness vs. Geometry

Kenneth W. Street (NASA Glenn Research Center), Christian M. Schrader (BAE Systems) and Doug Rickman (NASA Marshall Space Flight Center) - Geological Society of America Meeting , Houston, October 2008 - Compared to the Earth the geologic nature of the lunar regolith is quite distinct. Even though similar minerals exist on the Earth and Moon, they may have very different properties due to the absence of chemical modification in the lunar environment.

The engineering properties of the lunar regolith reflect aspects of the parent rock and the consequences of hypervelocity meteor bombardment. On scales relevant to machinery and chemical processing for In-Situ Resource Utilization, ISRU (such as water production), the lunar regolith compositional range is much more restricted than terrestrial material. This fact impacts predictions of properties required by design engineers for constructing equipment for lunar use.

In this paper two examples will be covered. 1) Abrasion is related to hardness and hardness is a commonly measured property for both minerals and engineering materials. Although different hardness scales are routinely employed for minerals and engineering materials, a significant amount of literature is available relating the two.

As one example, we discuss how to relate hardness to abrasion for the design of lunar equipment. We also indicate how abundant the various mineral phases are and typical size distributions for lunar regolith which will impact abrasive nature. 2) Mineral characteristics that may seem trivial to the non-geologist or material scientist may have significant bearing on ISRU processing technologies.

As a second example we discuss the impact of traces of F-, Cl-, and OH-, H2O, CO2, and sulfur species which can radically alter melting points and the corrosive nature of reaction products thereby significantly changing bulk chemistry and associated processing technologies. For many engineering uses, a simulant’s fidelity to bulk lunar regolith chemistry may be insufficient. Therefore, simulant users need to engage in continuing dialogue with simulant developers and geoscientists.

Presentation available for download as pdf - HERE.