Shackleton harbors ice after all

Spoke too soon! When JAXA released this Kaguya Terrain Camera image, showing the deep interior of Shackleton crater for the first time in 2008, scientists claimed it disappointingly showed no indication of ice, though no one yet can say how a slurry of lunar volatiles might appear. Now, however, researchers analyzing laser altimetry returned by the LOLA instrument on-board the Lunar Reconnaissance Orbiter (LRO) cite strong evidence of ice content in the permanently shadowed interior.  The Moon's south pole is serendipitously situated on Shackleton's rim, directly under all of LRO's nearly twenty thousand polar orbits since 2009, affording extraordinary study [JAXA/SELENE]..

Jennifer Chu

MIT News

If humans are ever to inhabit the moon, the lunar poles may well be the location of choice: Because of the small tilt of the lunar spin axis, the poles contain regions of near-permanent sunlight, needed for power, and regions of near-permanent darkness containing ice — both of which would be essential resources for any lunar colony.

The area around the moon’s Shackleton crater could be a prime site. Scientists have long thought that the crater — whose interior is a permanently sunless abyss — may contain reservoirs of frozen water. But inconsistent observations over the decades have cast doubt on whether ice might indeed exist in the shadowy depths of the crater, which sits at the moon’s south pole.

Now scientists from MIT, Brown University, NASA’s Goddard Space Flight Center and other institutions have mapped Shackleton crater with unprecedented detail, finding possible evidence for small amounts of ice on the crater’s floor. Using (the LOLA) laser altimeter on the Lunar Reconnaissance Orbiter (LRO) spacecraft, the team essentially illuminated the crater’s interior with laser light, measuring its albedo, or natural reflectance. The scientists found that the crater’s floor is in fact brighter than that of other nearby craters — an observation consistent with the presence of ice, which the team calculates may make up 22 percent of the material within a micron-thick layer on the crater’s floor.
 

http://youtu.be/j2NAZODSdwM 

The group published its findings today in the journal Nature.

In addition to the possible evidence of ice, the group’s map of Shackleton reveals a “remarkably preserved” crater that has remained relatively unscathed since its formation more than three billion years ago. The crater’s floor is itself pocked with several smaller craters, which may have formed as part of the collision that created Shackleton.

The crater, named after the Antarctic explorer Ernest Shackleton, is more than 12 miles wide and two miles deep — about as deep as Earth’s oceans. Maria Zuber, the team’s lead investigator and the E.A. Griswold Professor of Geophysics in MIT’s Department of Earth, Atmospheric and Planetary Sciences, describes the crater’s interior as “extremely rugged … It would not be easy to crawl around in there.”

Mapping the dark. Slipping past the Moon's south pole on the brightly lit rim of Shackleton crater, the dark of the permanently shadowed interior of the crater quickly overtakes a very steep crater wall, like the terrestrial oceans. LRO has skipped through thousands of polar orbits eventually carrying the vehicle over every area on the Moon's surface and over Shackleton, high at the top of everyone's list of priority targets, during every orbit,   LROC Narrow Angle Camera (NAC) M142464150L, LRO orbit 6128, October 23, 2010, 89.21° angle of incidence, 0.87 meters resolution from 41.91 kilometers [NASA/GSFC/Arizona State University].

The group was able to map the crater’s elevations and brightness in extreme detail, thanks in part to the LRO’s path: The spacecraft orbits the moon from pole to pole as the moon rotates underneath. With each orbit, the LRO’s laser altimeter maps a different slice of the moon, with each slice containing measurements of both poles. The upshot is that any terrain at the poles — Shackleton crater in particular — is densely recorded. Zuber and her colleagues took advantage of the spacecraft’s orbit to obtain more than 5 million measurements of the polar crater from more than 5,000 orbital tracks.

“We decided we would study the living daylights out of this crater,” Zuber says. “From the incredible density of observations we were able to make an extremely detailed topographic map.”

The team used the (LOLA) to map the crater’s elevations based on the time it took for laser light to bounce back from the moon’s surface: The longer it took, the lower the terrain’s elevation. Through these measurements, the group mapped the crater’s floor and the slope of its walls.

A quaking theory.The researchers also used the laser altimeter to measure the crater’s brightness, sending out pulses of infrared light at a specific wavelength. The crater’s surface absorbed some light based on its own natural albedo, reflecting the rest back to the spacecraft. The researchers calculated the difference, and mapped the relative brightness throughout the crater’s floor and walls.

While the crater’s floor was relatively bright, Zuber and her colleagues observed that its walls were even brighter. The finding was at first puzzling: Scientists had thought that if ice were anywhere in a crater, it would be on the floor, where very little sunlight penetrates. The upper walls of Shackleton crater, in comparison, are occasionally illuminated, which could evaporate any ice that accumulates.

How to explain the bright walls? The team studied the measurements, and came up with a theory: Every once in a while, the moon experiences seismic shaking brought on by collisions, or gravitational tides from Earth. Such “moonquakes” may have caused Shackleton’s walls to slough off older, darker soil, revealing newer, brighter soil underneath.

Until very recently luna incongnita, the permanently shadowed 10.3 km-wide interior of Shackleton, shouldering the Moon's south pole (blue arrow), today seems much like hundreds of other lunar craters of similar age and dimension. Its ink-black interior has steadily been brightly unveiled in a steady build-up of laser data points collected over the course of three years in polar orbit by the LOLA instrument on LRO. As it is on Earth, however, in Real Estate, "location is everything" [NASA/GSFC/LOLA].

Zuber says there may be multiple explanations for the observed brightness throughout the crater: For example, newer material may be exposed along its walls, while ice may be mixed in with its floor. Her team’s ultra-high-resolution map, she says, provides strong evidence for both.

Ben Bussey, staff scientist at Johns Hopkins University’s Applied Physics Laboratory, says the group’s evidence for ice in Shackleton crater may help determine the course for future lunar missions.

“Ice in the polar regions has been sort of an enigmatic thing for some time … I think this is another piece of evidence for the possibility of ice,” Bussey says. “To truly answer the question, we’ll have to send a lunar lander, and these results will help us select where to send a lander.”

Zuber adds that the group’s topographic map will help researchers understand crater formation and study other uncharted areas of the moon.

“I will never get over the thrill when I see a new terrain for the first time,” Zuber says. “It’s that sort of motivation that causes people to explore to begin with. Of course, we’re not risking our lives like the early explorers did, but there is a great personal investment in all of this for a lot of people.”

The research was supported by the Lunar Reconnaissance Orbiter Mission under the auspices of NASA’s Exploration Systems Mission Directorate and Science Mission Directorate.

Japan's scientists may have leaped to conclusions when they over-confidently announced there was no ice inside Shackleton (upper left), after releasing the first image of the crater's interior a few years ago, but their iconic high-definition image of an orbital Earthrise from November 2007 still takes the breath away [JAXA/NHK/SELENE].

Shackleton on a Summer's Day

Howard Fink takes a closer look at Hermite A

Howard Fink at New York University continues to make full sense of the hundreds of millions of laser altimetry data points measured by the LOLA instrument on board the Lunar Reconnaissance Orbiter since June 2009 [Howard Fink/NYU/NASA/GSFC/LOLA].

Joel Raupe

A lingering concern from those early, heady days of the Vision for Space Exploration, the initiative that set in motion the five spacecraft now orbiting the Moon, has been how to take full advantage of the unprecedented amount of data the precursor robotic spacecraft would return to Earth. This was true especially of LRO, a mission that broke the record for the sheer volume of information returned from deep space (from all previous missions combined). One answer emerging has proven to be crowd-sourcing.

The regular release of data in three month intervals has inspired many not professionally attached to the mission to assemble new global maps and montages. Even so, if the science still being pulled from the data record returned by the relatively modest Lunar Pioneer mission is used as a guide it's likely new discoveries about the Moon will still be being announced a least a decade after the LRO mission comes to an inevitable end.

One of those assembling lunar terrain models from LRO data is Howard Fink of New York University, in his case the LRO laser altimetry collected by the LOLA instrument - the most comprehensive of its kind.

Fink has just released a new and better model of Hermite A, a 22 kilometer-wide highland crater with an interior in permanent shadow not far from the Moon's north pole. That model can be viewed in detail at his Wordpress AstroPhoto blog, HERE.

In addition, "in tribute to all those who don't still have to look up how to spell its name," Fink released in February a remarkable look at Rozhdestvenskiy, HERE, in the context of the whole lunar pole region. Both can readily be compared with the data gleaned from the LROC Wide Angle Camera (WAC) derived elevation model, visible using the tools accompanying the LROC QuickMap, HERE.

Related Posts:
The replicators have arrived (November 7, 2011)
LOLA: Cold Hermite (April 10, 2011)
Lunar elevation models come in many forms (March 4, 2011)
LRO's unprecedented topography of the Moon (December 17, 2010)
LROC: The Lunar North Pole (October 5, 2010)
LRO Mini-RF spends month mapping lunar poles (August 8, 2010)
'Potentially ice-rich' crater in Rozhdestvenskiy (July 2, 2010)
Coldest Spot on the Moon (December 16, 2009)

The replicators have arrived

"Slide show" comparing an illumination model of the lunar north pole region, made using a three-dimensional printer and LRO laser altimetry by Howard Fink of New York University, with standard representations of LOLA data and one LROC WAC mosaic [Howard Fink/NYU/NASA/GSFC/ASU].

Paul D. Spudis
The Once & Future Moon
Smithsonian Air & Space

Of all the wonders depicted in science fiction books and movies, one of the most intriguing is the machine that makes anything that you need or desire.  Merely enter a detailed plan, or push the button for items programmed into the machine – dials twirl, the machine hums and out pops what you requested.  Technology gives us Aladdin’s Lamp.  A handy device that will find many uses.

We’re not quite there yet but crude versions of such imagined machines already exist.  These machines are called “rapid prototype” generators or three-dimensional printers.  They take digitized information about the dimensions and shape of an object and use that data to control a fabricator that re-creates the object using a variety of different materials.  Typically, these machines use easy to mold plastics and epoxy resins but in principle, any material could be used to create virtually any object.

3-D printers contribute to the advancement our understanding of lunar morphology, as LRO fills long-neglected gaps in lunar morphology. Malapert Massif (85.9°S, 0.42°E). From an 80 meter resolution image of the South Pole region of the Moon built from a 20 meter original supplied by the LRO/LOLA science team [Howard Fink/NYU].

For comparison nearly the same area modeled by laser altimetry (LOLA) above, Malapert from the LROC Wide Angle Camera (WAC) RDR 100 meter Global Mosaic [NASA/GSFC/Arizona State University].

What’s the relevance of this technology to spaceflight and to the Moon?  One of the key objects of lunar return is to learn how to use the material and energy resources of the Moon to create new capabilities.  To date, we have focused our attention on simple raw materials like bulk regolith (soil) and the water found at the poles.  It makes sense to initially limit our resource utilization ambitions to simple materials that are both useful and relatively massive, which currently have those killer transportation costs when delivered from Earth.  Bulk regolith has many different uses, such as shielding (e.g., rocket exhaust blast berms) as well as raw material for simple surface structures.

However, once we are on the Moon and have met the basic necessities of life, we can begin to experiment with making and using more complex products.  In effect, the inhabitants of the Moon will begin to create more complicated parts and items from what they find around them, just outside their door.  The techniques of three-dimensional printing will allow us to discover what makes life off-planet easier and more productive.  We will experiment by using the local materials to maintain and repair equipment, build new structures, and finally begin off-planet manufacturing.

To illustrate the obliquity of the view angle and the problem posed in gathering information about the tantalizing but permanently shadowed regions of the Moon, Shackleton crater, with the Moon's South Pole on its rim (upper left) together with Malapert Massif on the horizon, seen with Earth as a back drop. HDTV still from Japan's Kaguya orbiter released November 2007 [JAXA/NHK/SELENE].

During the early stages of lunar habitation, material and equipment will be brought from Earth.  With continued use, particularly in the harsh lunar surface environment, breakdowns will occur.  Although initially we will use spare parts from Earth, for simple uncomplicated structures that are needed quickly, a three-dimensional printer can make substitute parts using local resource materials found near the outpost.  Most existing 3-D printers on Earth use plastics and related materials (which are complex carbon-based compounds, mostly derived from petroleum) but some processing has used concrete, which can be made on the Moon from sieved regolith and water.  In addition, we also know that regolith can be fused into ceramic using microwaves, so rapid prototyping activities on the Moon may eventually find that partially melting particulate matter into glass is another way to create useful objects.

The lunar surface is a good source of material and energy useful in creating a wide variety of objects.  I mentioned simple ceramics and aggregates, but additionally, a variety of metals (including iron, aluminum and titanium) are available on the Moon.  Silicon for making electronic components and solar cells is abundant on the Moon.  Designs for robotic rovers that literally fuse the in-place upper surface of the lunar regolith into electricity-producing solar cells have already been imagined and prototyped.  We can outsource solar energy jobs to the Moon!

These technical developments lead to mind-boggling possibilities.  Back in the 1940s, the mathematician John von Neumann imagined what he called “self-replicating automata,” small machines that could process information to reproduce themselves at exponential rates.  Interestingly, von Neumann himself thought of the idea of using such automata in space, where both energy and materials are (quite literally) unlimited.  A machine that contains the information and the ability to reproduce itself may ultimately be the tool humanity needs to “conquer” space.  Hordes of reproducing robots could prepare a planet for colonization as well as providing safe havens and habitats.

We can experiment on the Moon with self-replicating machines because it contains the necessary material and energy resources.  Of course, in the near-term, we will simply use this new technology to create spare parts and perhaps simple objects that we find serve our immediate and utilitarian needs.  But things like this have a habit of evolving far beyond their initial envisioned use, and often in directions that we do not expect; we are not smart enough to imagine what we don’t know.  The technology of three-dimensional printing will make the habitation of the Moon – our nearest neighbor in space – easier and more productive.  Even now, creative former NASA workers have found a way to make this technology pay off.  In the future, perhaps their talents could be applied to making the Moon a second home to humanity.

Originally published October 24, 2011 at his Smithsonian Air & Space blog The Once and Future Moon, Dr. Spudis is a Senior Staff Scientist at the Lunar and Planetary Institute in Houston. The opinions expressed are those of the author and are better informed than average.